CBPL methods do not include proprietary information such as ASTM Standards.
Mineral fuels, mineral oils and products of their distillation; bituminous substances; mineral waxes
27-01
Standard Test Method for API Gravity of crude Petroleum and Petroleum Products (Hydrometer Method) (ASTM D 287)
27-02
Standard Practice for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Meter (ASTM D 1298)
27-03
Standard Test Method for Water in Crude Oil by Distillation (ASTM D 4006)
27-04
Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation (ASTM D 95)
27-05
Standard Test Method for Water in Crude Oils by Coulometric Karl Fischer Titration (ASTM D 4928)
27-06
Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method (ASTM D 473)
27-07
Standard Test Method for Sediment in Crude Oil by Membrane Filtration (ASTM D 4807)
27-08
Standard Test Method for Distillation of Petroleum Products (ASTM D 86)
27-09
Standard Test Method for Vapor Pressure of Gasoline and Gasoline-Oxgenate Blends (Dry Method) (ASTM D 4953)
27-10
Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method) (ASTM D 323)
27-11
Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (the Calculation of Dynamic Velocity) (ASTM D 445)
27-12
Standard Test Method for Saybolt Viscosity (ASTM D 88)
27-13
Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy-Dispersive X-ray Fluorescence Spectrometry (ASTM D 4294)
27-14
Standard Test Method for Sulfur in Petroleum Products (X-Ray Spectrographic Methods) (ASTM D 2622)
27-15
Standard Practice for Sampling and Handling Liquid Cyclic Products (ASTM D 3437)
27-16
Standard Practice for Sampling Industrial Chemicals (ASTM E 300)
27-17
Standard Practice for Sampling and Handling Naphthalene, Maleic Anhydride, and Phthalic Anhydride (ASTM D 3438)
27-18
Standard Practice for Sampling and Handling Phenol and Cresylic Acid (ASTM D 3852)
27-19
Standard Test Methods for Assay of Alkaline Cresylate Solutions from Petroleum Sources (ASTM D 3439)
27-20
Standard Practice for Manual Sampling of Petroleum and Petroleum Products (ASTM D 4057)
27-21
Standard Practice for the Automatic Sampling of Petroleum and Petroleum Products (ASTM D 4177)
27-22
Standard Specification for Fuel Oils (ASTM D 396)
27-23
Standard Specification for Diesel Fuel Oils (ASTM D 975)
27-24
Standard Specification for Marine Fuels (ASTM D 2069)
27-25
Standard Specification for Gas Turbine Fuel Oils (ASTM D 2880)
27-26
Standard Specification for Automotive Spark-Ignition Engine Fuel
27-27
Standard Specification for Aviation Turbine Fuels (ASTM D 1655)
27-28
Standard Specification for Aviation Gasolines (ASTM D 910)
27-29
Standard Specification for Kerosine (ASTM D 3699)
27-30
Standard Specification for Mineral Spirits (Petroleum Spirit) (Hydrocarbon Dry Cleaning Solvent) (ASTM D 235)
27-31
Standard Specification for VM&P Naphthas (ASTM D 3735)
27-32
Standard Test Method for Congealing Point of Petroleum Waxes Including Petrolatum (ASTM D 938)
27-33
Standard Test Method for Penetration of Bituminous Materials (ASTM D 5)
27-34
Standard Test Method for Cone Penetration of Lubricating Grease (ASTM D 217)
27-35
Standard Test Method for Cone Penetration of Petrolatum (ASTM D 937)
27-36
Standard Practice for Sampling Liquid Petroleum (LP) Gases (Manual Method) (ASTM D 1265)
27-37
Standard Practice for Evaluation of Mass Spectrometers for Quantitative Analysis from a Batch Inlet (ASTM E 137)
27-38
Standard Test Method for Chemical Composition of Gases by Mass Spectrometry (ASTM D 2650)
27-39
Standard Test Method for Oil Content of Petroleum Waxes (ASTM D 721)
27-40
Standard Practice for Sampling Bituminous Materials (ASTM D 140)
27-41
Standard Specifications for Emulsified Asphalts (ASTM D 977)
27-42
Standard Test Methods for Emulsified Asphalts (ASTM D 244)
27-43
Standard Specifications for Cutback Asphalt (Slow Curing Type) (ASTM D 2026)
27-44
Standard Specifications for Cutback Asphalt (Medium Curing Type) (ASTM D 2027)
27-45
Standard Specifications for Cutback Asphalt (Rapid Curing Type) (ASTM D 2028)
27-46
Standard Test Method for Density and Relative Density of Crude Oils by Digital Density Analyzer (ASTM D 5002)
27-47
Guidelines for Country-of-Origin Determinations of Distillate Petroleum Products from Iraq
27-48
Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter (ASTM D 4052)
27-49
Nuclear Magnetic Resonance (USP 761)
27-50
Standard Test Methods for Flash-Point by Pensky-Martens Closed Cup Tester (ASTM D 93)
27-51
Standard Test Method for Paraffin-Type Hydrocarbons in Carnauba Wax
27-52
Thermal Analysis (USP 891)
27-53
Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge (ASTM D 2709)
27-54
Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)
27-55
Standard Test Methods for Proximate Analysis of the Analysis Sample of Coal and Coke by Instrumental Procedures (ASTM D 5142)
27-57
Standard Test Method for Sulfur in Gasoline and Diesel Fuel by Monochromatic Wavelength Dispersive X-Ray Fluorescence Spectrometry (ASTM D 7039)
27-58
Standard Test Method For Vapor Pressure of Petroleum Products (Mini Method) (ASTM D 5191)
27-59
Standard Practice for General Techniques of Gas Chromatography Infrared (GC/IR) Analysis (ASTM E 1642)
27-60
Standard Test Method for Aromatic Carbon Contents of Hydrocarbon Oils by High Resolution Nuclear Magnetic Resonance Spectroscopy (ASTM D 5292)