On May 30, 2018, the President issued a Presidential Proclamation under Section 232 of the Trade Expansion Act of 1962 providing for an absolute quota for imports of steel mill products from Argentina and Brazil, effective for goods entered for consumption, or withdrawn from warehouse for consumption, on or after 12:01 a.m. eastern daylight time on June 1, 2018.
Subheadings 9903.80.05 through 9903.80.58, inclusive, set forth the ordinary customs duty treatment for the steel mill products of any country enumerated in the superior text to such subheadings, subject to the annual aggregate quantitative limitations proclaimed for these subheadings. Imports from any such country in an aggregate quantity under any such subheading during any of the periods January through March, April through June, July through September, or October through December in any year that is in excess of 30 percent of the total aggregate quantity provided for a calendar year for such country, as set forth on CBP.gov shall not be allowed.
This Quota Bulletin provides information on annual absolute quota quantities for Argentina and Brazil steel imports as of June 1, 2018, and additional information may be issued at the end of each quarter for convenience of importers of steel products under absolute quota. Please check https://www.cbp.gov/trade/quota for commodity status report information on remaining absolute quota amounts.
Commodity
Iron or steel products as specified in Presidential Proclamation
Quota Period for Iron or Steel Products
January 1, 2018 through December 31, 2018
Restraint Level
For Iron or steel products (see list below for details)
Reporting Instructions
Argentina and Brazil Iron or Steel Products
For quota merchandise, use entry type code 02, 06, 07, 12, 23, 32, 38, or 52
Note: Merchandise covered by absolute quota may also be subject to antidumping and countervailing duties.
In addition to reporting the chapter 72 and chapter 73 Harmonized Tariff Schedule (HTS) classification for the imported merchandise, importers shall report the following HTS classifications for imported merchandise subject to the quota: 9903.80.05 through 9903.80.58.
Absolute quota merchandise may not be imported into the U.S for consumption after quota limit is reached [19 CFR 132]. Options after the quota limit is reached include warehouse, exportation or destruction.
Countries Covered
Argentina and Brazil
Special Instructions
Iron or Steel Products (Absolute Quota)
As of June 1, 2018, CBP is implementing absolute quota processing functionality in the Automated Commercial Environment (ACE). Absolute quota will be processed on a daily basis, Monday to Friday (excluding holidays) at 8:00 pm EST, and cargo release of shipments subject to the absolute quota will be withheld until the absolute quota is processed and quota amounts are allocated.
In order for shipments to be processed for absolute quota on the same day at 8:00 pm EST, the entry summary must be filed, entry summary payment date must be on file or scheduled for a future statement, and the conveyance arrived by 4:30 pm in the port’s local time zone. The official hours for quota processing are established by 19 CFR 132.3.
Duty Rate for absolute quota for Iron or Steel
Rate of Duty: Free
Quota Bulletins (QB) are posted at https://www.cbp.gov/trade/quota/bulletins and updated as determined by future announcements. The trade may track the status of absolute quotas provided in the weekly Commodity Status Report at https://www.cbp.gov/trade/quota/tariff-rate-quotas.
Questions from the importing community regarding this electronic message should be referred to the appropriate CBP Port of Entry or Center for Excellence and Expertise. The Port/Center may refer questions to headquarters Quota and Agriculture Branch at (202) 863-6986, or through email to HQQUOTA@cbp.dhs.gov.
Please note quantities listed below are subject to change as quota is processed. These amounts are only for information.
For the purposes of administering the quantitative limitations applicable to subheadings 9903.80.05 through 9903.80.58 with respect to Argentina and Brazil, the following annual aggregate limits shall apply for the period starting with calendar year 2018 and for subsequent years, unless modified or terminated.
| Heading/Subheading | Article Description | Quantitative Limitation |
|---|---|---|
|
9903.80.05 |
Hot-rolled sheet, provided for in subheading 7208.10.60, 7208.26.00, 7208.27.00, 7208.38.00, 7208.39.00, 7208.40.60, 7208.53.00, 7208.54.00, 7208.90.00, 7225.30.70 or 7225.40.70 |
6,475,837 kg |
|
9903.80.06 |
Hot-rolled strip, provided for in subheading 7211.19.15, 7211.19.20, 7211.19.30, 7211.19.45, 7211.19.60, 7211.19.75, 7226.91.70 or 7226.91.80 |
0 kg (Quota Filled) |
|
9903.80.07 |
Hot-rolled plate, in coils, provided for in subheading 7208.10.15, 7208.10.30, 7208.25.30, 7208.25.60, 7208.36.00, 7208.37.00, 7211.14.00 (except for statistical reporting numbers 7211.14.0030 and 7211.14.0045) or 7225.30.30 |
3,450,561 kg |
|
9903.80.08 |
Cold-rolled sheet, and other products, provided for in subheading 7209.15.00, 7209.16.00, 7209.17.00, 7209.18.15, 7209.18.60, 7209.25.00, 7209.26.00, 7209.27.00, 7209.28.00, 7209.90.00, 7210.70.30, 7225.50.70, 7225.50.80 or 7225.99.00 |
4,733,644 kg |
|
9903.80.09 |
Cold-rolled strip, and other products, provided for in subheading 7211.23.15, 7211.23.20, 7211.23.30, 7211.23.45, 7211.23.60, 7211.29.20, 7211.29.45, 7211.29.60, 7211.90.00, 7212.40.10, 7212.40.50, 7226.92.50, 7226.92.70, 7226.92.80 or 7226.99.01 (except for statistical reporting numbers 7226.99.0110 and 7226.99.0130) |
0 kg (Quota Filled) |
|
9903.80.10 |
Cold-rolled black plate, provided for in subheading 7209.18.25 |
0 kg (Quota Filled) |
|
9903.80.11 |
Plate in cut lengths, provided for in subheading 7208.40.30, 7208.51.00, 7208.52.00, 7210.90.10, 7211.13.00, 7211.14.00 (except for statistical reporting number 7211.14.0090), 7225.40.30, 7225.50.60 or 7226.91.50 |
0 kg (Quota Filled) |
|
9903.80.12 |
Flat-rolled products, hot-dipped, provided for in subheading 7210.41.00, 7210.49.00, 7210.70.60 (except for statistical reporting numbers 7210.70.6030 and 7210.70.6090), 7212.30.10, 7212.30.30, 7212.30.50, 7225.92.00 or 7226.99.01 (except for statistical reporting numbers 7226.99.0110 and 7226.99.0180) |
701 kg |
|
9903.80.13 |
Flat-rolled products, coated, provided for in subheading 7210.20.00, 7210.61.00, 7210.69.00, 7210.70.60 (except for statistical reporting numbers 7210.70.6030 and 7210.70.6060), 7210.90.60, 7210.90.90, 7212.50.00 or 7212.60.00 |
0 kg (Quota Filled) |
|
9903.80.14 |
Tin-free steel, provided for in subheading 7210.50.00 |
0 kg (Quota Filled) |
|
9903.80.15 |
Tin plate, provided for in subheading 7210.11.00, 7210.12.00 or 7212.10.00 |
0 kg (Quota Filled) |
|
9903.80.16 |
Silicon electrical steel sheets and strip, provided for in subheading 7225.11.00, 7225.19.00, 7226.11.10, 7226.11.90, 7226.19.10 or 7226.19.90 |
0 kg (Quota Filled) |
|
9903.80.17 |
Sheets and strip electrolytically coated or plated with zinc, provided for in subheading 7210.30.00, 7210.70.60 (except for statistical reporting numbers 7210.70.6060 and 7210.70.6090), 7212.20.00, 7225.91.00 or 7226.99.01 (except for statistical reporting numbers 7226.99.0130 and 7226.99.0180) |
0 kg (Quota Filled) |
|
9903.80.18 |
Oil country pipe and tube goods, provided for in subheading 7304.23.30, 7304.23.60, 7304.29.10, 7304.29.20, 7304.29.31, 7304.29.41, 7304.29.50, 7304.29.61, 7305.20.20, 7305.20.40, 7305.20.60, 7305.20.80, 7306.29.10, 7306.29.20, 7306.29.31, 7306.29.41, 7306.29.60 or 7306.29.81 |
147,963,294 kg |
|
9903.80.19 |
Line pipe exceeding 406.4 mm in outside diameter, provided for in subheading 7304.19.10 (except for statistical reporting numbers 7304.19.1020, 7304.19.1030, 7304.19.1045 and 7304.19.1060), 7304.19.50 (except for statistical reporting numbers 7304.19.5020 and 7304.19.5050), 7305.11.10, 7305.11.50, 7305.12.10, 7305.12.50, 7305.19.10 or 7305.19.50 |
0 kg (Quota Filled) |
|
9903.80.20 |
Line pipe not exceeding 406.4 mm in outside diameter, provided for in subheading 7304.19.10 (except for statistical reporting number 7304.19.1080), 7304.19.50 (except for statistical reporting number 7304.19.5080), 7306.19.10 (except for statistical reporting number 7306.19.1050) or 7306.19.51 (except for statistical reporting number 7306.19.5150) |
4,988,957 kg |
|
9903.80.21 |
Other line pipe, provided for in subheading 7306.19.10 (except for statistical reporting number 7306.19.1010) or 7306.19.51 (except for statistical reporting number 7306.19.5110) |
0 kg (Quota Filled) |
|
9903.80.22 |
Standard pipe, provided for in subheading 7304.39.00 (except for statistical reporting numbers 7304.39.0002, 7304.39.0004, 7304.39.0006, 7304.39.0008, 7304.39.0028, 7304.39.0032, 7304.39.0040, 7304.39.0044, 7304.39.0052, 7304.39.0056, 7304.39.0068 and 7304.39.0072), 7304.59.80 (except for statistical reporting numbers 7304.59.8020, 7304.59.8025, 7304.59.8035, 7304.59.8040, 7304.59.8050, 7304.59.8055, 7304.59.8065 and 7304.59.8070) or 7306.30.50 (except for statistical reporting numbers 7306.30.5010, 7306.30.5015, 7306.30.5020 and 7306.30.5035) |
2,378,183 kg |
|
9903.80.23 |
Structural pipe and tube, provided for in subheading 7304.90.10, 7304.90.30, 7305.31.20, 7305.31.40, 7305.31.60 (except for statistical reporting number 7305.31.6010), 7306.30.30, 7306.50.30, 7306.61.10, 7306.61.30, 7306.69.10 or 7306.69.30 |
2,374 kg |
|
9903.80.24 |
Mechanical tubing and other products, provided for in subheading 7304.31.30, 7304.31.60 (except for statistical reporting numbers 7304.31.6010), 7304.39.00 (except for statistical reporting numbers 7304.39.0002, 7304.39.0004, 7304.39.0006, 7304.39.0008, 7304.39.0016, 7304.39.0020, 7304.39.0024, 7304.39.0036, 7304.39.0048, 7304.39.0062, 7304.39.0076 and 7304.39.0080), 7304.51.10, 7304.51.50 (except for statistical reporting numbers 7304.51.5005, 7304.51.5015 and 7304.51.5045), 7304.59.10, 7304.59.60, 7304.59.80 (except for statistical reporting numbers 7304.59.8010, 7304.59.8015, 7304.59.8030, 7304.59.8045, 7304.59.8060 and 7304.59.8080), 7304.90.50, 7304.90.70, 7306.30.10, 7306.30.50 (except for statistical reporting numbers 7306.30.5010, 7306.30.5025, 7306.30.5028, 7306.30.5032, 7306.30.5040, 7306.30.5055, 7306.30.5085 and 7306.30.5090), 7306.50.10, 7306.50.50 (except for statistical reporting number 7306.50.5010), 7306.61.50, 7306.61.70 (except for statistical reporting number 7306.61.7030), 7306.69.50 or 7306.69.70 (except for statistical reporting number 7306.69.7030) |
8,758,712 kg |
|
9903.80.25 |
Pressure tubing and other products, provided for in subheading 7304.31.60 (except for statistical reporting number 7304.31.6050), 7304.39.00 (except for statistical reporting numbers 7304.39.0016, 7304.39.0020, 7304.39.0024, 7304.39.0028, 7304.39.0032, 7304.39.0036, 7304.39.0040, 7304.39.0044, 7304.39.0048, 7304.39.0052, 7304.39.0056, 7304.39.0062, 7304.39.0068, 7304.39.0072, 7304.39.0076 and 7304.39.0080), 7304.51.50 (except for statistical reporting numbers 7304.51.5005 and 7304.51.5060), 7304.59.20, 7306.30.50 (except for statistical reporting numbers 7306.30.5015, 7306.30.5020, 7306.30.5025, 7306.30.5028, 7306.30.5032, 7306.30.5035, 7306.30.5040, 7306.30.5055, 7306.30.5085 and 7306.30.5090) or 7306.50.50 (except for statistical reporting numbers 7306.50.5030, 7306.50.5050 and 7306.50.5070) |
128,482 kg |
|
9903.80.26 |
Tubes or pipes for piling and other products, provided for in subheading 7305.39.10 or 7305.39.50 |
0 kg (Quota Filled) |
|
9903.80.27 |
Pipes and tubes, not specially provided for, provided for in subheading 7304.51.50 (except for statistical reporting numbers 7304.51.5015, 7304.51.5045 and 7304.51.5060), 7305.90.10, 7305.90.50, 7306.90.10 or 7306.90.50 |
3,743 kg |
|
9903.80.28 |
Hot-rolled sheet of stainless steel, provided for in subheading 7219.13.00, 7219.14.00, 7319.23.00 or 7219.24.00 |
0 kg (Quota Filled) |
|
9903.80.29 |
Hot-rolled strip of stainless steel and other products, provided for in subheading 7220.12.10 or 7220.12.50 |
0 kg (Quota Filled) |
|
9903.80.30 |
Hot-rolled plate of stainless steel, in coils, and other products, provided for in subheading 7219.11.00 or 7219.12.00 |
0 kg (Quota Filled) |
|
9903.80.31 |
Cold-rolled sheet of stainless steel, provided for in subheading 7219.32.00, 7219.33.00, 7219.34.00, 7219.35.00 or 7219.90.00 |
0 kg (Quota Filled) |
|
9903.80.32 |
Cold-rolled strip of stainless steel, provided for in subheading 7220.20.10, 7220.20.60, 7220.20.70, 7220.20.80, 7220.20.90 or 7220.90.00 |
0 kg (Quota Filled) |
|
9903.80.33 |
Cold-rolled plate of stainless steel, in coils, provided for in subheading 7219.31.00 (except for statistical reporting number 7219.31.0050) |
0 kg (Quota Filled) |
|
9903.80.34 |
Wire of stainless steel, drawn, provided for in subheading 7223.00.10, 7223.00.50 or 7223.00.90 |
0 kg (Quota Filled) |
|
9903.80.35 |
Pipes and tubes of stainless steel, provided for in subheading 7304.41.30, 7304.41.60, 7304.49.00, 7305.31.60 (except for statistical reporting number 7305.31.6090), 7306.40.10, 7306.40.50, 7306.61.70 (except 7306.61.7060) or 7306.69.70 (except for statistical reporting number 7306.69.7060) |
0 kg (Quota Filled) |
|
9903.80.36 |
Line pipe of stainless steel, provided for in subheading 7304.11.00 or 7306.11.00 |
0 kg (Quota Filled) |
|
9903.80.37 |
Bars and rods of stainless steel, cold finished, provided for in subheading 7222.20.00 or 7222.30.00 |
0 kg (Quota Filled) |
|
9903.80.38 |
Bars and rods of stainless steel, hot-rolled, provided for in heading 7221.00.00 (except for statistical reporting numbers 7221.00.0017, 7221.00.0018 and 7221.00.0030) or subheading 7222.11.00, 7222.19.00 or 7222.40.30 (except for statistical reporting numbers 7222.40.3025 and 7222.40.3045) |
0 kg (Quota Filled) |
|
9903.80.39 |
Blooms, billets and slabs of stainless steel and other products, provided for in subheading 7218.91.00 and 7218.99.00 |
0 kg (Quota Filled) |
|
9903.80.40 |
Oil country pipe and tube goods of stainless steel and other products, provided for in subheading 7304.22.00, 7304.24.30, 7304.24.40, 7304.24.60, 7306.21.30, 7306.21.40 or 7306.21.80 |
34,298 kg |
|
9903.80.41 |
Ingot and other primary forms of stainless steel, provided for in subheading 7218.10.00 |
0 kg (Quota Filled) |
|
9903.80.42 |
Flat-rolled products of stainless steel, provided for in subheading 7219.21.00, 7219.22.00, 7219.31.00 (except for statistical reporting number 7219.31.0010) or 7220.11.00 |
0 kg (Quota Filled) |
|
9903.80.43 |
Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel, provided for in heading 7221.00.00 (except for statistical reporting numbers 7221.00.0005, 7221.00.0045 and 7221.00.0075) |
0 kg (Quota Filled) |
|
9903.80.44 |
Angles, shapes and sections of stainless steel, provided for in subheading 7222.40.30 (except for statistical reporting numbers 7222.40.3065 and 7222.40.3085) or 7222.40.60 |
209 kg |
|
9903.80.45 |
Angles, shapes and sections, provided for in subheading 7216.31.00, 7216.32.00, 7216.33.00, 7216.40.00, 7216.50.00, 7216.99.00, 7228.70.30 (except for statistical reporting numbers 7228.70.3060 and 7228.70.3081) or 7228.70.60 |
0 kg (Quota Filled) |
|
9903.80.46 |
Bars and rods, hot-rolled, in irregularly wound coils, provided for in subheading 7213.91.30, 9213.91.45, 7213.91.60, 7213.99.00 (except for statistical reporting number 7213.99.0060), 7227.20.00 (except for statistical reporting number 7227.20.0080) or 7227.90.60 (except for statistical reporting numbers 7227.90.6005, 7227.90.6010, 7227.90.6040 and 7227.90.6090) |
182,555 kg (Quota Filled) |
|
9903.80.47 |
Wire (other than of stainless steel), provided for in subheading 7217.10.10, 7217.10.20, 7217.10.30, 7217.10.40, 7217.10.50, 7217.10.60, 7217.10.70, 7217.10.80, 7217.10.90, 7217.20.15, 7217.20.30, 7217.20.45, 7217.20.60, 7217.20.75, 7217.30.15, 7217.30.30, 7217.30.45, 7217.30.60, 7217.30.75, 7217.90.10, 7217.90.50, 7229.20.00, 7229.90.10, 7229.90.50 or 7229.90.90 |
2,076 kg |
|
9903.80.48 |
Bars, hot-rolled, not of stainless steel, provided for in subheading 7213.20.00, 7213.99.00 (except for statistical reporting numbers 7213.99.0030 and 7213.99.0090), 7214.10.00, 7214.30.00, 7214.91.00, 7214.99.00, 7215.90.10, 7227.20.00 (except for statistical reporting number 7227.20.0030), 7227.90.60 (except for statistical reporting numbers 7227.90.6020, 7227.90.6030 and 7227.90.6035), 7228.20.10, 7228.30.80 (except for statistical reporting number 7228.30.8010), 7228.40.00, 7228.60.60 or 7228.80.00 |
896,377 kg |
|
9903.80.49 |
Bars, cold-finished, not of stainless steel, provided for in subheading 7215.10.00, 7215.50.00, 7215.90.30, 7215.90.50, 7228.20.50, 7228.50.50 or 7228.60.80 |
0 kg (Quota Filled) |
|
9903.80.50 |
Angles, shapes and sections of a type known as “light-shaped bars” and other products, provided for in subheading 7216.10.00, 7216.21.00, 7216.22.00 or 7228.70.30 (except for statistical reporting numbers 7228.70.3010, 7228.70.3020 and 7228.70.3041) |
0 kg (Quota Filled) |
|
9903.80.51 |
Reinforcing bars, provided for in subheading 7213.10.00, 7214.20.00 or 7228.30.80 (except for statistical reporting numbers 7228.30.8005, 7228.30.8015, 7228.30.8041, 7228.30.8045 and 7228.30.8070) |
0 kg (Quota Filled) |
|
9903.80.52 |
Sheet piling, provided for in subheading 7301.10.00 |
0 kg (Quota Filled) |
|
9903.80.53 |
Nonumerated railroad goods, provided for in subheading 7302.40.00, 7302.90.10 and 7302.90.90 |
0 kg (Quota Filled) |
|
9903.80.54 |
Rails other than those known as “standard rails,” provided for in subheading 7302.10.10 (except for statistical reporting numbers 7302.10.1010, 7302.10.1035, 7302.10.1065 and 7302.10.1075) |
0 kg (Quota Filled) |
|
9903.80.55 |
Rails known as “standard rails,” provided for in subheading 7302.10.10 (except for statistical reporting numbers 7302.10.1015, 7302.10.1025, 7302.10.1045 and 7302.10.1055) or 7302.10.50 |
0 kg (Quota Filled) |
|
9903.80.56 |
Products of tool steel and other products, provided for in subheading 7224.10.00 (except for statistical reporting numbers 7224.10.0005 and 7224.10.0075), 7224.90.00 (except for statistical reporting numbers 7224.90.0005, 7224.90.0045, 7224.90.0055, 7224.90.0065 and 7224.90.0075), 7225.30.11, 7225.30.51, 7225.40.11, 7225.40.51, 7225.50.11, 7226.20.00, 7226.91.05, 7226.91.15, 7226.91.25, 7226.92.10, 7226.92.30, 7227.10.00, 7227.90.10, 7227.90.20, 7228.10.00, 7228.30.20, 7228.30.40, 7228.30.60, 7228.50.10, 7228.60.10 or 7229.90.05 |
0 kg (Quota Filled) |
|
9903.80.57 |
Blooms, billets and slabs, semi-finished, provided for in subheading 7207.11.00, 7207.12.00, 7207.19.00, 7207.20.00 or 7224.90.00 (except for statistical reporting numbers 7224.90.0015, 7224.90.0025, and 7224.90.0035) |
0 kg (Quota Filled) |
|
9903.80.58 |
Ingots, provided for in subheading 7206.10.00, 7206.90.00 or 7224.10.00 (except for statistical reporting number 7224.10.0045) |
0 kg (Quota Filled) |
| Heading/Subheading | Article Description | Quantitative Limitation |
|---|---|---|
| 9903.80.05 | Hot-rolled sheet, provided for in subheading 7208.10.60, 7208.26.00, 7208.27.00, 7208.38.00, 7208.39.00, 7208.40.60, 7208.53.00, 7208.54.00, 7208.90.00, 7225.30.70 or 7225.40.70 | 108,453,546 kg |
| 9903.80.06 | Hot-rolled strip, provided for in subheading 7211.19.15, 7211.19.20, 7211.19.30, 7211.19.45, 7211.19.60, 7211.19.75, 7226.91.70 or 7226.91.80 | 5,730 kg |
| 9903.80.07 | Hot-rolled plate, in coils, provided for in subheading 7208.10.15, 7208.10.30, 7208.25.30, 7208.25.60, 7208.36.00, 7208.37.00, 7211.14.00 (except for statistical reporting numbers 7211.14.0030 and 7211.14.0045) or 7225.30.30 | 21,645,653 kg |
| 9903.80.08 | Cold-rolled sheet, and other products, provided for in subheading 7209.15.00, 7209.16.00, 7209.17.00, 7209.18.15, 7209.18.60, 7209.25.00, 7209.26.00, 7209.27.00, 7209.28.00, 7209.90.00, 7210.70.30, 7225.50.70, 7225.50.80 or 7225.99.00 | 51,717,234 kg |
| 9903.80.09 | Cold-rolled strip, and other products, provided for in subheading 7211.23.15, 7211.23.20, 7211.23.30, 7211.23.45, 7211.23.60, 7211.29.20, 7211.29.45, 7211.29.60, 7211.90.00, 7212.40.10, 7212.40.50, 7226.92.50, 7226.92.70, 7226.92.80 or 7226.99.01 (except for statistical reporting numbers 7226.99.0110 and 7226.99.0130) | 220,366 kg |
| 9903.80.10 | Cold-rolled black plate, provided for in subheading 7209.18.25 | 0 kg (Quota Filled) |
| 9903.80.11 | Plate in cut lengths, provided for in subheading 7208.40.30, 7208.51.00, 7208.52.00, 7210.90.10, 7211.13.00, 7211.14.00 (except for statistical reporting number 7211.14.0090), 7225.40.30, 7225.50.60 or 7226.91.50 | 9,116,198 kg |
| 9903.80.12 | Flat-rolled products, hot-dipped, provided for in subheading 7210.41.00, 7210.49.00, 7210.70.60 (except for statistical reporting numbers 7210.70.6030 and 7210.70.6090), 7212.30.10, 7212.30.30, 7212.30.50, 7225.92.00 or 7226.99.01 (except for statistical reporting numbers 7226.99.0110 and 7226.99.0180) | 179,284,354 kg |
| 9903.80.13 | Flat-rolled products, coated, provided for in subheading 7210.20.00, 7210.61.00, 7210.69.00, 7210.70.60 (except for statistical reporting numbers 7210.70.6030 and 7210.70.6060), 7210.90.60, 7210.90.90, 7212.50.00 or 7212.60.00 |
49,974,441 kg |
| 9903.80.14 | Tin-free steel, provided for in subheading 7210.50.00 | 2,428,916 kg (Quota Filled) |
| 9903.80.15 | Tin plate, provided for in subheading 7210.11.00, 7210.12.00 or 7212.10.00 | 11,315,455 kg (Quota Filled) |
| 9903.80.16 | Silicon electrical steel sheets and strip, provided for in subheading 7225.11.00, 7225.19.00, 7226.11.10, 7226.11.90, 7226.19.10 or 7226.19.90 | 2,186,384 kg |
| 9903.80.17 | Sheets and strip electrolytically coated or plated with zinc, provided for in subheading 7210.30.00, 7210.70.60 (except for statistical reporting numbers 7210.70.6060 and 7210.70.6090), 7212.20.00, 7225.91.00 or 7226.99.01 (except for statistical reporting numbers 7226.99.0130 and 7226.99.0180) | 687,693 kg |
| 9903.80.18 | Oil country pipe and tube goods, provided for in subheading 7304.23.30, 7304.23.60, 7304.29.10, 7304.29.20, 7304.29.31, 7304.29.41, 7304.29.50, 7304.29.61, 7305.20.20, 7305.20.40, 7305.20.60, 7305.20.80, 7306.29.10, 7306.29.20, 7306.29.31, 7306.29.41, 7306.29.60 or 7306.29.81 | 56,857,548 kg (Quota Filled) |
| 9903.80.19 | Line pipe exceeding 406.4 mm in outside diameter, provided for in subheading 7304.19.10 (except for statistical reporting numbers 7304.19.1020, 7304.19.1030, 7304.19.1045 and 7304.19.1060), 7304.19.50 (except for statistical reporting numbers 7304.19.5020 and 7304.19.5050), 7305.11.10, 7305.11.50, 7305.12.10, 7305.12.50, 7305.19.10 or 7305.19.50 | 40,712 kg (Quota Filled) |
| 9903.80.20 | Line pipe not exceeding 406.4 mm in outside diameter, provided for in subheading 7304.19.10 (except for statistical reporting number 7304.19.1080), 7304.19.50 (except for statistical reporting number 7304.19.5080), 7306.19.10 (except for statistical reporting number 7306.19.1050) or 7306.19.51 (except for statistical reporting number 7306.19.5150) | 21,382,360 kg (Quota Filled) |
| 9903.80.21 |
Other line pipe, provided for in subheading 7306.19.10 (except for statistical reporting number 7306.19.1010) or 7306.19.51 (except for statistical reporting number 7306.19.5110) |
57,319 kg (Quota Filled) |
| 9903.80.22 | Standard pipe, provided for in subheading 7304.39.00 (except for statistical reporting numbers 7304.39.0002, 7304.39.0004, 7304.39.0006, 7304.39.0008, 7304.39.0028, 7304.39.0032, 7304.39.0040, 7304.39.0044, 7304.39.0052, 7304.39.0056, 7304.39.0068 and 7304.39.0072), 7304.59.80 (except for statistical reporting numbers 7304.59.8020, 7304.59.8025, 7304.59.8035, 7304.59.8040, 7304.59.8050, 7304.59.8055, 7304.59.8065 and 7304.59.8070) or 7306.30.50 (except for statistical reporting numbers 7306.30.5010, 7306.30.5015, 7306.30.5020 and 7306.30.5035) | 987,756 kg |
| 9903.80.23 | Structural pipe and tube, provided for in subheading 7304.90.10, 7304.90.30, 7305.31.20, 7305.31.40, 7305.31.60 (except for statistical reporting number 7305.31.6010), 7306.30.30, 7306.50.30, 7306.61.10, 7306.61.30, 7306.69.10 or 7306.69.30 | 642,480 kg |
| 9903.80.24 | Mechanical tubing and other products, provided for in subheading 7304.31.30, 7304.31.60 (except for statistical reporting numbers 7304.31.6010), 7304.39.00 (except for statistical reporting numbers 7304.39.0002, 7304.39.0004, 7304.39.0006, 7304.39.0008, 7304.39.0016, 7304.39.0020, 7304.39.0024, 7304.39.0036, 7304.39.0048, 7304.39.0062, 7304.39.0076 and 7304.39.0080), 7304.51.10, 7304.51.50 (except for statistical reporting numbers 7304.51.5005, 7304.51.5015 and 7304.51.5045), 7304.59.10, 7304.59.60, 7304.59.80 (except for statistical reporting numbers 7304.59.8010, 7304.59.8015, 7304.59.8030, 7304.59.8045, 7304.59.8060 and 7304.59.8080), 7304.90.50, 7304.90.70, 7306.30.10, 7306.30.50 (except for statistical reporting numbers 7306.30.5010, 7306.30.5025, 7306.30.5028, 7306.30.5032, 7306.30.5040, 7306.30.5055, 7306.30.5085 and 7306.30.5090), 7306.50.10, 7306.50.50 (except for statistical reporting number 7306.50.5010), 7306.61.50, 7306.61.70 (except for statistical reporting number 7306.61.7030), 7306.69.50 or 7306.69.70 (except for statistical reporting number 7306.69.7030) | 1,611,145 kg |
| 9903.80.25 | Pressure tubing and other products, provided for in subheading 7304.31.60 (except for statistical reporting number 7304.31.6050), 7304.39.00 (except for statistical reporting numbers 7304.39.0016, 7304.39.0020, 7304.39.0024, 7304.39.0028, 7304.39.0032, 7304.39.0036, 7304.39.0040, 7304.39.0044, 7304.39.0048, 7304.39.0052, 7304.39.0056, 7304.39.0062, 7304.39.0068, 7304.39.0072, 7304.39.0076 and 7304.39.0080), 7304.51.50 (except for statistical reporting numbers 7304.51.5005 and 7304.51.5060), 7304.59.20, 7306.30.50 (except for statistical reporting numbers 7306.30.5015, 7306.30.5020, 7306.30.5025, 7306.30.5028, 7306.30.5032, 7306.30.5035, 7306.30.5040, 7306.30.5055, 7306.30.5085 and 7306.30.5090) or 7306.50.50 (except for statistical reporting numbers 7306.50.5030, 7306.50.5050 and 7306.50.5070) | 1,728,024 kg (Quota Filled) |
| 9903.80.26 |
Tubes or pipes for piling and other products, provided for in subheading 7305.39.10 or 7305.39.50 |
27 kg |
| 9903.80.27 | Pipes and tubes, not specially provided for, provided for in subheading 7304.51.50 (except for statistical reporting numbers 7304.51.5015, 7304.51.5045 and 7304.51.5060), 7305.90.10, 7305.90.50, 7306.90.10 or 7306.90.50 | 1,231 kg |
| 9903.80.28 | Hot-rolled sheet of stainless steel, provided for in subheading 7219.13.00, 7219.14.00, 7319.23.00 or 7219.24.00 | 1,051,455 kg |
| 9903.80.29 | Hot-rolled strip of stainless steel and other products, provided for in subheading 7220.12.10 or 7220.12.50 | 0 kg (Quota Filled) |
| 9903.80.30 | Hot-rolled plate of stainless steel, in coils, and other products, provided for in subheading 7219.11.00 or 7219.12.00 | 120,126 kg |
| 9903.80.31 | Cold-rolled sheet of stainless steel, provided for in subheading 7219.32.00, 7219.33.00, 7219.34.00, 7219.35.00 or 7219.90.00 | 9,982,549 kg |
| 9903.80.32 | Cold-rolled strip of stainless steel, provided for in subheading 7220.20.10, 7220.20.60, 7220.20.70, 7220.20.80, 7220.20.90 or 7220.90.00 | 14,629 kg (Quota Filled) |
| 9903.80.33 | Cold-rolled plate of stainless steel, in coils, provided for in subheading 7219.31.00 (except for statistical reporting number 7219.31.0050) | 0 kg (Quota Filled) |
| 9903.80.34 | Wire of stainless steel, drawn, provided for in subheading 7223.00.10, 7223.00.50 or 7223.00.90 | 63,219 kg |
| 9903.80.35 | Pipes and tubes of stainless steel, provided for in subheading 7304.41.30, 7304.41.60, 7304.49.00, 7305.31.60 (except for statistical reporting number 7305.31.6090), 7306.40.10, 7306.40.50, 7306.61.70 (except 7306.61.7060) or 7306.69.70 (except for statistical reporting number 7306.69.7060) | 352,216 kg |
| 9903.80.36 | Line pipe of stainless steel, provided for in subheading 7304.11.00 or 7306.11.00 | 0 kg (Quota Filled) |
| 9903.80.37 | Bars and rods of stainless steel, cold finished, provided for in subheading 7222.20.00 or 7222.30.00 | 142,452 kg |
| 9903.80.38 | Bars and rods of stainless steel, hot-rolled, provided for in heading 7221.00.00 (except for statistical reporting numbers 7221.00.0017, 7221.00.0018 and 7221.00.0030) or subheading 7222.11.00, 7222.19.00 or 7222.40.30 (except for statistical reporting numbers 7222.40.3025 and 7222.40.3045) | 1,354,481 kg |
| 9903.80.39 | Blooms, billets and slabs of stainless steel and other products, provided for in subheading 7218.91.00 and 7218.99.00 | 186 kg |
| 9903.80.40 | Oil country pipe and tube goods of stainless steel and other products, provided for in subheading 7304.22.00, 7304.24.30, 7304.24.40, 7304.24.60, 7306.21.30, 7306.21.40 or 7306.21.80 | 11,284 kg |
| 9903.80.41 | Ingot and other primary forms of stainless steel, provided for in subheading 7218.10.00 | 0 kg (Quota Filled) |
| 9903.80.42 | Flat-rolled products of stainless steel, provided for in subheading 7219.21.00, 7219.22.00, 7219.31.00 (except for statistical reporting number 7219.31.0010) or 7220.11.00 | 522,098 kg |
| 9903.80.43 | Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel, provided for in heading 7221.00.00 (except for statistical reporting numbers 7221.00.0005, 7221.00.0045 and 7221.00.0075) |
0 kg (Quota Filled) |
| 9903.80.44 | Angles, shapes and sections of stainless steel, provided for in subheading 7222.40.30 (except for statistical reporting numbers 7222.40.3065 and 7222.40.3085) or 7222.40.60 | 0 kg (Quota Filled) |
| 9903.80.45 | Angles, shapes and sections, provided for in subheading 7216.31.00, 7216.32.00, 7216.33.00, 7216.40.00, 7216.50.00, 7216.99.00, 7228.70.30 (except for statistical reporting numbers 7228.70.3060 and 7228.70.3081) or 7228.70.60 | 785,743 kg |
| 9903.80.46 | Bars and rods, hot-rolled, in irregularly wound coils, provided for in subheading 7213.91.30, 9213.91.45, 7213.91.60, 7213.99.00 (except for statistical reporting number 7213.99.0060), 7227.20.00 (except for statistical reporting number 7227.20.0080) or 7227.90.60 (except for statistical reporting numbers 7227.90.6005, 7227.90.6010, 7227.90.6040 and 7227.90.6090) | 94,548,099 kg |
| 9903.80.47 | Wire (other than of stainless steel), provided for in subheading 7217.10.10, 7217.10.20, 7217.10.30, 7217.10.40, 7217.10.50, 7217.10.60, 7217.10.70, 7217.10.80, 7217.10.90, 7217.20.15, 7217.20.30, 7217.20.45, 7217.20.60, 7217.20.75, 7217.30.15, 7217.30.30, 7217.30.45, 7217.30.60, 7217.30.75, 7217.90.10, 7217.90.50, 7229.20.00, 7229.90.10, 7229.90.50 or 7229.90.90 | 5,683,988 kg |
| 9903.80.48 | Bars, hot-rolled, not of stainless steel, provided for in subheading 7213.20.00, 7213.99.00 (except for statistical reporting numbers 7213.99.0030 and 7213.99.0090), 7214.10.00, 7214.30.00, 7214.91.00, 7214.99.00, 7215.90.10, 7227.20.00 (except for statistical reporting number 7227.20.0030), 7227.90.60 (except for statistical reporting numbers 7227.90.6020, 7227.90.6030 and 7227.90.6035), 7228.20.10, 7228.30.80 (except for statistical reporting number 7228.30.8010), 7228.40.00, 7228.60.60 or 7228.80.00 | 19,466,296 kg (Quota Filled) |
| 9903.80.49 | Bars, cold-finished, not of stainless steel, provided for in subheading 7215.10.00, 7215.50.00, 7215.90.30, 7215.90.50, 7228.20.50, 7228.50.50 or 7228.60.80 | 892,811 kg |
| 9903.80.50 | Angles, shapes and sections of a type known as “light-shaped bars” and other products, provided for in subheading 7216.10.00, 7216.21.00, 7216.22.00 or 7228.70.30 (except for statistical reporting numbers 7228.70.3010, 7228.70.3020 and 7228.70.3041) | 160,604 kg |
| 9903.80.51 | Reinforcing bars, provided for in subheading 7213.10.00, 7214.20.00 or 7228.30.80 (except for statistical reporting numbers 7228.30.8005, 7228.30.8015, 7228.30.8041, 7228.30.8045 and 7228.30.8070) | 22,142,544 kg (Quota Filled) |
| 9903.80.52 | Sheet piling, provided for in subheading 7301.10.00 | 0 kg (Quota Filled) |
| 9903.80.53 | Nonumerated railroad goods, provided for in subheading 7302.40.00, 7302.90.10 and 7302.90.90 | 372,848 kg |
| 9903.80.54 | Rails other than those known as “standard rails,” provided for in subheading 7302.10.10 (except for statistical reporting numbers 7302.10.1010, 7302.10.1035, 7302.10.1065 and 7302.10.1075) | 1,089 kg |
| 9903.80.55 | Rails known as “standard rails,” provided for in subheading 7302.10.10 (except for statistical reporting numbers 7302.10.1015, 7302.10.1025, 7302.10.1045 and 7302.10.1055) or 7302.10.50 | 939 kg |
| 9903.80.56 | Products of tool steel and other products, provided for in subheading 7224.10.00 (except for statistical reporting numbers 7224.10.0005 and 7224.10.0075), 7224.90.00 (except for statistical reporting numbers 7224.90.0005, 7224.90.0045, 7224.90.0055, 7224.90.0065 and 7224.90.0075), 7225.30.11, 7225.30.51, 7225.40.11, 7225.40.51, 7225.50.11, 7226.20.00, 7226.91.05, 7226.91.15, 7226.91.25, 7226.92.10, 7226.92.30, 7227.10.00, 7227.90.10, 7227.90.20, 7228.10.00, 7228.30.20, 7228.30.40, 7228.30.60, 7228.50.10, 7228.60.10 or 7229.90.05 |
9,426,132 kg |
| 9903.80.57 | Blooms, billets and slabs, semi-finished, provided for in subheading 7207.11.00, 7207.12.00, 7207.19.00, 7207.20.00 or 7224.90.00 (except for statistical reporting numbers 7224.90.0015, 7224.90.0025, and 7224.90.0035) |
3,505,707,831 kg |
| 9903.80.58 | Ingots, provided for in subheading 7206.10.00, 7206.90.00 or 7224.10.00 (except for statistical reporting number 7224.10.0045) |
8,719 kg |